The PrOzone-F1 is a wall-mounted digital electrochemical ozone monitor. It can be used for environmental and safety monitoring or system control. It utilizes an extremely stable electro-chemical sensor which requires no warm-up time. The sensor has a lifespan of more than 5 years. The unit has two ranges: 2ppm and 20ppm. It features a large attractive blue on a white backlit LCD. The system is accurate to better than 10% and operates over a wide range of temperature and humidity.

The unit has a super-bright alarm LED, a buzzer and a N/O / N/C relay output. There is also a reset alarm button. The alarm threshold levels are programmable from 0 to 20ppm.

There is an RS232 port for logging the data so that it can be imported via a terminal program for use in spreadsheet programs.

There is also an analog 0V to 2V output.

An optional 4-20mA port and optional RS485 port are also available.

Settings can be done via on-board tactile switched or via the RS232 port using a terminal program.

Unlike many competitor products, it doesn’t need hours to warm-up and is ready for operation in a minute on power-up. This means it doesn’t need to be continuously supplied with power to avoid long start-up times as in many systems where factories may power off their systems after a shift.