Products

It performs the work of two instruments: a medium-range ozone analyser and a precision low-level instrument. With its built-in long-life pump and internal battery, it is the perfect instrument for the industrial, medical and environmental fields. It has a fast 1-minute warm-up which saves the user time.

Its compact form makes it super portable and with its USB port, it can be charged, set up and logs downloaded.

• Accurate and stable UV absorption method
• Range: 0 to 1000ppm
• Accuracy: greater of 1ppb (1σ) [adaptive filter] or 2% of measurement
• Resolution: 1ppb
• Precision: greater of 1ppb (1σ) [adaptive filter] or 2% of measurement
• Limit of detection: 2ppb (2σ) [adaptive filter]
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• 10,000 hour pump
• Solid state UV LED technology with 40,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 0°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%

• Humidity equalization technology
• Ozone units: ppb, ppm, ug/m3, mg/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Flow rate: 0.5lpm (nominal); 0.2lpm (min.)
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Backlit LCD display
• Rechargeable battery operation: 8 hours (backlight off)
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• USB charging
• USB data download
• Size: 160mm x 100mm x 51mm

• Industrial hygiene monitoring where ozone may be present in the workplace
• Research and quality checking of ozone emitting equipment
• Monitoring high ozone concentrations such as process off-gassing
• Long-term monitoring at remote locations where power is highly limited
• Monitoring and control of ozone in industrial settings
• Monitoring of exposure to individuals in the workplace
• Personal exposure monitoring for studies of health effects of air pollutants

With its built-in long-life pump and 100,000 hour solid state LED light source, it is the perfect instrument for the industrial, medical and environmental fields. The system offers USB, RS232, RS485,0-2.5V analog output, a 4-20mA output and 2 relay outputs.

A unique option available is for a 70,000 hour fan instead of a pump for safety sensor applications which allow usage for many years without maintenance.

• Accurate and stable UV absorption method
• Range: 0 to 1000ppm
• Accuracy: greater of 1ppb (1σ) [adaptive filter] or 2% of measurement
• Resolution: 1ppb
• Precision: greater of 1ppb (1σ) [adaptive filter] or 2% of measurement
• Limit of detection: < 2ppb (2σ) [adaptive filter]
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• 15,000 hour pump or 70,000 hour fan
• Solid state UV LED technology with 100,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 5°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%

• Humidity equalization technology
• Ozone units: ppb, ppm, ug/m3, mg/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Flow rate: 0.5lpm (nominal); 0.2lpm (min.)
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Large backlit LCD display
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• Supply: 12VDC to 24VDC or 110VAC to 220VAC
• USB or RS232 data download
• RS232, RS485 and USB serial ports
• 0-2.5V and 4-20mA analog outputs
• 2 x relays for alarm or system control
• Size: 240mm x 195mm x 90mm; IP56

• Industrial hygiene monitoring where ozone may be present in the workplace
• Control of ozone generators and systems
• Research and quality checking of ozone emitting equipment
• Monitoring high ozone concentrations such as process off-gassing.
• Long-term monitoring at remote locations where power is highly limited
• Monitoring and control of ozone in industrial settings
• Monitoring of exposure to individuals in the workplace
• Personal exposure monitoring for studies of health effects of air pollutants

With its built-in long-life pump, 100,000 hour solid state UV LED light source and internal battery, it is the perfect instrument for the industrial, medical and environmental fields.

It has a fast 1-minute warm-up which saves the user time. Its compact form makes it super portable and with its USB port, it can be charged, set up and logs downloaded.

• Accurate and stable UV absorption method
• Range: 0 to 10,000ppm
• Accuracy: greater of 10ppb (1σ) [adaptive filter] or 2% of measurement
• Resolution: 10ppb
• Precision: greater of 10ppb (1σ) [adaptive filter] or 2% of measurement
• Limit of detection: 20ppb (2σ) [adaptive filter]
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• 10,000 hour pump
• Solid state UV LED technology with 100,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 0°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%

• Humidity equalization technology
• Ozone units: ppm, mg/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Flow rate: 0.5lpm (nominal); 0.2lpm (min.)
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Backlit LCD display
• Rechargeable battery operation: 8 hours (backlight off)
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• USB charging
• USB data download
• Size: 160mm x 100mm x 51mm

• Industrial hygiene monitoring where ozone may be present in the workplace.
• Research and quality checking of ozone emitting equipment.
• Monitoring high ozone concentrations such as process off-gassing.
• Long-term monitoring at remote locations where power is highly limited
• Monitoring and control of ozone in industrial settings
• Monitoring of exposure to individuals in the workplace

With its built-in long-life pump and 100,000 hour solid state UV LED light source, it is the perfect instrument for the industrial, medical and environmental fields.

The system offers USB, RS232, RS485,0-2.5V analog output, a 4-20mA output and 2 relay outputs. Its 1-min warm-up time means that it ready to operate almost immediately which saves time when used in industrial control systems.

A unique option available is for a 70,000 hour fan instead of a pump for safety sensor applications which allow usage for many years without maintenance.

• Accurate and stable UV absorption method
• Range: 0 to 10,000ppm
• Accuracy: greater of 10ppb (1σ) [adaptive filter] or 2% of measurement
• Resolution: 10ppb
• Precision: greater of 10ppb (1σ) [adaptive filter] or 2% of measurement
• Limit of detection: < 20ppb (2σ) [adaptive filter]
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• 15,000 hour pump or 70,000 hour fan
• Solid state UV LED technology with 100,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 5°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%

• Humidity equalization technology
• Ozone units: ppm, mg/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Flow rate: 0.5lpm (nominal); 0.2lpm (min.)
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Large backlit LCD display
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• Supply: 12VDC to 24VDC or 110VAC to 220VAC
• USB or RS232 data download
• RS232, RS485 and USB serial ports
• 0-2.5V and 4-20mA analog outputs
• 2 x relays for alarm or system control
• Size: 240mm x 195mm x 90mm; IP56

• Industrial hygiene monitoring where ozone may be present in the workplace
• Control of ozone generators and systems
• Research and quality checking of ozone emitting equipment
• Monitoring high ozone concentrations such as process off-gassing
• Long-term monitoring at remote locations where power is highly limited
• Monitoring and control of ozone in industrial settings
• Monitoring of exposure to individuals in the workplace

With its 100,000 hour solid state LED light source, it is the perfect instrument for industrial fields. The system offers USB, RS232, RS485,0-2.5V analogue output, a 4-20mA output and 2 relay outputs.

Its 1-min warm-up time means that it is ready to operate almost immediately, which saves time when used in industrial control systems

• Accurate and stable UV absorption method
• Range: 0 to 20% by weight (300g/m3)
• Accuracy: greater of 0.01% or 2% of measurement
• Resolution: 0.01%
• Precision: greater of 0.01% or 2% of measurement
• Limit of detection: 0.02%
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• Solid state UV LED technology with 100,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 0°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%
• Max pressure: 3.5bar
• Flow rate: 0.1lpm to 50lpm (max.)

• Ozone units: % by weight air, % by weight oxygen and g/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Backlit LCD display
• Rechargeable battery operation: 8 hours (backlight off)
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• USB charging
• USB data download
• Size: 160mm x 100mm x 51mm

• Monitoring of ozone generator output
• Monitoring of residual ozone after a cleaning or oxidation process
• Research and quality checking of ozone emitting equipment

With its 100,000 hour solid state LED light source, it is the perfect instrument for industrial fields.

The system offers USB, RS232, RS485,0-2.5V analogue output, a 4-20mA output and 2 relay outputs. Its 1-min warm-up time means that it is ready to operate almost immediately, which saves time when used in industrial control systems.

• Accurate and stable UV absorption method
• Range: 0 to 20% by weight (300g/m3)
• Accuracy: greater of 0.01% (1σ) or 2% of measurement
• Resolution: 0.01%
• Precision: greater of 0.01% (1σ) or 2% of measurement
• Limit of detection: < 0.02% (2σ)
• Update rate: 1s
• Response time: 2s (Filter = 2s), 30s (filter = 30s)
• Solid state UV LED technology with 100,000 hour lifespan
• Built-in temperature & pressure compensation
• Operating temp (continuous): 0°C to +50°C
• Operating humidity (continuous non-condensing): 0% to 95%
• Max pressure: 3.5bar
• Ozone units: % by weight air, % by weight oxygen and g/m3
• Temp units: K, °C, °F
• Pressure units: kPa, mbar, torr
• Flow rate: 0.1lpm to 50lpm (max.)
• Averaging modes: 2s-120s, 1min, 5min, 15min, 30min, 1h
• On-board data logger memory: 32000 lines of data
• Large backlit LCD display
• Programmable alarm levels with alarm buzzer
• Warm up time: 1 min
• Supply: 12VDC to 24VDC or 110VAC to 220VAC
• USB or RS232 data download
• RS232, RS485 and USB serial ports
• 0-2.5V and 4-20mA analogue outputs
• 2 x relays for alarm or system control
• Size: 240mm x 195mm x 90mm; IP56

• Monitoring of ozone generator output
• Monitoring of residual ozone after a cleaning or oxidation process
• Control of industrial ozone processes
• Research and quality checking of ozone emitting equipment

It utilizes an extremely stable electro-chemical sensor which requires no warm-up time. The sensor has a lifespan of greater than 5 years. The unit has two ranges: 2ppm and 20ppm. It features a large attractive blue on a white backlit LCD. The system is accurate to better than 10% and operates over a wide range of temperature and humidity.

The rechargeable batteries will allow operation up to 100 hours.

There is an RS232 port for logging the data so that it can be imported via a terminal program for use in spreadsheet programs.

The unit also features an alarm with programmable threshold levels.

• 0 to 2ppm and 0-20ppm ranges
• Accuracy: better than 10%
• 10ppb resolution
• Response time (80% of final value): < 3min
• Backlit LCD display.Alarm Buzzer
• Sensor life: > 5 years
• Built-in temperature compensation
• Operating temperature (continuous): -20°C to +40°C
• Operating humidity (continuous non-condensing): 15 to 95%
• Rechargeable battery charge time: 15 hours
• Rechargeable battery operation: 100 hours (backlight off)
• Rechargeable battery operation: 24hours (backlight on)
• Programmable alarm levels
• Unit can be used within 30s of power up (depending on filter time)
• RS232 logging port.
• Optional RS485 port
• System setup and offset calibration from keypad menu
• System setup and full digital calibration from the RS232 port
• Size: 110mm x 85mm x 42mm

• Laundries using ozone
• Large noisy factory environments
• Casinos and other ozonated public areas
• Agricultural treatment / cold storage areas for fruits, vegetables, fish, poultry, etc.
• Farms
• Food processing plants
• Monitor ozone levels in treatment storage areas for fruits, vegetables, and other agricultural products.
• Monitor ozonated HVAC systems.
• Control the output of ozone generators using the set-point controlled relay.
• Use as either ozone leak alarm or ozone failure alarm for all sizes of ozone generators.

It can be used for environmental and safety monitoring or system control.

It utilizes an extremely stable electro-chemical sensor which requires no warm-up time. The sensor has a lifespan of more than 5 years.The unit has two ranges: 2ppm and 20ppm. It features a large attractive blue on a white backlit LCD. The system is accurate to better than 10% and operates over a wide range of temperature and humidity.

The unit has a super-bright alarm LED, a buzzer and a N/O / N/C relay output.

The relay can be used to control an ozone generator and the on/off levels are programmed from the push-buttons or the serial port.

There is also a reset alarm button. The alarm threshold levels are programmable from 0 to 20ppm.

There is an RS232 port for logging the data so that it can be imported via a terminal program for use in spreadsheet programs.

There is also an analog 0V to 2V output.

An optional 4-20mA port and optional RS485 port are also available.

Settings can be done via on-board tactile switches or via the RS232 port using a terminal program.

Unlike many competitor products, it doesn’t need hours to warm-up and is ready for operation in a minute on power-up. This means it doesn’t need to be continuously supplied with power to avoid long start-up times as in many systems where factories may power off their systems after a shift.

• 0 to 2ppm and 0-20ppm ranges
• Accuracy: better than 10%
• 10ppb resolution
• Response time (80% of final value): < 3min
• Backlit LCD display
• External alarm reset button
• Super-bright alarm LED
• Sensor life: > 5 years
• Built-in temperature compensation
• Operating temp (continuous): -20°C to +40°C
• Operating humidity (continuous non-condensing): 15% to 95%
• 1-min initialization period on power up
• Programmable alarm level
• Alarm / control relay (N/O + N/C) + optional secondary relay
• Alarm Buzzer
• RS232 logging port
• Optional RS485
• Optional 4-20mA output
• 12V or 24V supply
• 0-2V analog output for ozone and temperature levels
• System setup and offset calibration from on-board tactile switches
• System setup and full digital calibration from the RS232 port
• Size: 135mm x 85mm x 42mm (flange mount)

• Laundries using ozone
• Large noisy factory environments
• Casinos and other ozonated public areas
• Agricultural treatment / cold storage areas for fruits, vegetables, fish, poultry, etc
• Farms
• Food processing plants
• Monitor ozone levels in treatment storage areas for fruits, vegetables, and other agricultural products
• Monitor ozonated HVAC systems
• Control the output of ozone generators using the set-point controlled relay
• Use as either ozone leak alarm or ozone failure alarm for all sizes of ozone generators

It is designed to measure the oxygen content of pure, dry gases and gas mixtures that demand high measuring-accuracy, reliability and long-term stability.

The OXYAN300 can measure over the range from 0.1% to 100%. It displays its output on a backlit LCD display and features an extremely long operational life due to its non-consumptive sensor design – in excess of 5 years. It also has active pressure compensation which ensures excellent stability. All modes of operation can be set from the integral keypad.

With its clear backlit display, its 8-hour battery capacity and non-consumptive zirconium dioxide sensor technology, this product provides many years operation without needing service.

• Range from 0.1% to 100%
• Super long-life sensor due to non-consumptive technology (5 to 10 years)
• High accuracy – better than 1%
• Single and 2-point calibration
• Linearity of better than 0.3% from 0.1% to 100% oxygen
• Built-in pressure regulator
• Maximum input pressure of 10bar
• Consumption of 300ml / min
• Built-in internal restriction
• Active pressure compensation from 0.5 bar to 1.2 bar ambient atmospheric pressure
• Max ambient temperature of 60°C (convection cooled)
• Internal resettable fuse (automatic)
• Cold start-up time of 5 minutes
• Heartbeat / Ready LED and Power LED
• Backlit LCD display and 12 key keypad
• Powder coated chassis of size: 220 X 165 X 120mm
• 8-hour battery capacity
• 4mm push pipe gas inlet and outlet

• Large scale PSA Oxygen generators
• Food monitoring
• Aquaculture
• Diving equipment

They are designed to continuously measure oxygen content of pure, dry gases and gas mixtures that demand high measurement accuracy, reliability and long-term stability.

They can measure over the range 0.1% to 100%. They provide a 4-20mA output or a 0-5V / 10V output. The OXYAN-100 series has been developed specifically for integration into PSA oxygen generators and other oxygen applications. They feature extremely long life operation due to non-consumptive sensor design, typically in excess of 5 years.

They provide an RS232 output, 4-20mA and 0 to 10V outputs. Calibration is performed using their digital interface via the RS232 port or manually, using pushbuttons.

The OXYAN-100 is pressure compensated with active pressure compensation from 0.15 bar to 1.2 bar ambient pressure.

The OXYAN-100S auto-calibration version allows remote auto-calibration. This can save many hours in travelling time and costs. It has built-in solenoid valves for switching between the reference gas and the calibration gas. The auto-calibration gas may be dry air, thus allowing very low maintenance costs.

• Purity range: 0.1% to 100%
• Super long-life zirconium dioxide sensor due to non-consumptive technology (5 to 10 years)
• High accuracy – better than 1%
• Active pressure compensation (version with P postfix) from 0.5 bar to 1.2 bar ambient atmospheric pressure
• Operates off 24V DC supply
• Low power consumption of 12W
• 4-20mA and 0-5V/10V analog outputs
• Single and 2-point calibration
• Linearity of better than 0.3% from 0.1% to 100% oxygen
• 1 bar input pressure

• Consumption of 300ml / min
• Built-in internal restriction
• Cold start-up time of 5 minutes
• Two open collector alarm outputs
• Calibration and setup from RS232 on hyperterminal OR manual pushbutton calibration (no PC required)
• Open stainless steel chassis of size: 168 X 130 X 68mm
• Remote auto-calibration model (OXYAN-100S) has built-in solenoid valves to automatically switch to reference.
• Calibration reference gas may be dry air @ 20.95% which allows accurate low-cost calibration (OXYAN-100S)

• Large scale PSA Oxygen generators
• Food monitoring
• Aquaculture
• Diving equipment

The Ultrox ultrasonic oxygen analyser has been designed for long-term accuracy and stability and is suitable for portable PSA oxygen concentrator solutions.

It measures purities up to 100% with a resolution of 0.1% and flow rates to 20 lpm with a resolution of 0.1 lpm. It has built-in temperature compensation and the methodology is automatically independent of pressure change.

The unit maintains its calibration in excess of 10 years, however, it may be calibrated via a serial port link and running hyperterminal. Parameters such as MA filter length for both purity and flow may be set up. It can also be calibrated via the serial port link.

The unit offers analog voltage output options for both purity and flow and also a 4-20mA option is available for purity. It also offers a digital output via RS232.

The high supply voltage option allows the unit to run off a 24V DC supply.

Various port options are also offered.

• O­₂ range: 15% to 100%
• O­₂ accuracy: ± 1.5% (resol: 0.1%)
• Flow range: 0 to 20 lpm
• Flow accuracy: 0.1 lpm
• Temperature range: -10°C to +70°C
• Pressure range: 4.5bar
• Thermal response time: 1°K/min
• RS232: output Purity and Flow

• Analog output: 2V or 5V output for purity and flow or 4-20mA for purity
• Programmable MA filter for purity and flow
• Power: 5V or 8V to 24V
• Calibration via RS232 via Hyperterminal
• Calibration stability: 10 years
• Ports: option 6mm barbs; 4mm, 6mm or 10mm push-fittings.
• Size: 140mm x 33mm x 40mm

• PSA Oxygen generators
• Food monitoring
• Aquaculture
• Diving equipment